There are no products listed under this category.
From switches to thermostats, these components help keep your pressure washer’s electrical system running reliably. Ideal for repairs or upgrades.
There are no products listed under this category.
| Nozzle Size | Flow | Operating Pressure Range (psi) | |||||||||
| Orifice | Flow rate | 362 | 435 | 507 | 580 | 652 | 725 | 797 | 870 | 942 | 1015 |
| 0.15 mm (0.006″) |
L/min | 0.03 | 0.033 | 0.036 | 0.038 | 0.04 | 0.043 | 0.045 | 0.047 | 0.049 | 0.05 |
| US gpm | 0.008 | 0.009 | 0.009 | 0.01 | 0.011 | 0.011 | 0.012 | 0.012 | 0.013 | 0.013 | |
| 0.20 mm (0.008″) |
L/min | 0.04 | 0.044 | 0.048 | 0.051 | 0.054 | 0.057 | 0.06 | 0.062 | 0.065 | 0.068 |
| US gpm | 0.011 | 0.012 | 0.013 | 0.013 | 0.014 | 0.015 | 0.016 | 0.017 | 0.017 | 0.018 | |
| 0.30 mm (0.012″) |
L/min | 0.068 | 0.075 | 0.081 | 0.086 | 0.091 | 0.096 | 0.101 | 0.105 | 0.11 | 0.114 |
| US gpm | 0.018 | 0.02 | 0.021 | 0.023 | 0.024 | 0.025 | 0.027 | 0.028 | 0.029 | 0.03 | |
| 0.40 mm (0.016″) |
L/min | 0.104 | 0.113 | 0.123 | 0.131 | 0.139 | 0.146 | 0.154 | 0.16 | 0.167 | 0.173 |
| US gpm | 0.027 | 0.03 | 0.032 | 0.035 | 0.037 | 0.039 | 0.041 | 0.042 | 0.044 | 0.046 | |
| 0.50 mm (0.020″) |
L/min | 0.114 | 0.125 | 0.135 | 0.144 | 0.153 | 0.161 | 0.169 | 0.176 | 0.183 | 0.19 |
| US gpm | 0.03 | 0.033 | 0.036 | 0.038 | 0.04 | 0.043 | 0.045 | 0.047 | 0.048 | 0.05 | |
| 0.60 mm (0.024″) |
L/min | 0.138 | 0.152 | 0.164 | 0.175 | 0.186 | 0.196 | 0.205 | 0.215 | 0.223 | 0.232 |
| US gpm | 0.037 | 0.04 | 0.043 | 0.046 | 0.049 | 0.052 | 0.054 | 0.057 | 0.059 | 0.061 | |
| 0.80 mm (0.032″) |
L/min | 0.165 | 0.181 | 0.195 | 0.209 | 0.221 | 0.233 | 0.245 | 0.256 | 0.266 | 0.276 |
| US gpm | 0.044 | 0.048 | 0.052 | 0.055 | 0.058 | 0.062 | 0.065 | 0.068 | 0.07 | 0.073 | |
| 1.00 mm (0.040″) |
L/min | 0.188 | 0.206 | 0.222 | 0.237 | 0.251 | 0.264 | 0.276 | 0.287 | 0.298 | 0.308 |
| US gpm | 0.05 | 0.054 | 0.059 | 0.063 | 0.067 | 0.07 | 0.073 | 0.076 | 0.079 | 0.081 | |
| 1.20 mm (0.048″) |
L/min | 0.207 | 0.227 | 0.245 | 0.262 | 0.278 | 0.293 | 0.307 | 0.32 | 0.332 | 0.343 |
| US gpm | 0.054 | 0.06 | 0.065 | 0.069 | 0.073 | 0.077 | 0.081 | 0.085 | 0.088 | 0.091 | |
All nozzles were tested at 1,000 psi using water at 70°F (21.1°C). The room humidity was between 40-50% during the tests. The patternation measurements were conducted using the SETscan OP600 patternator that can measure sprays up to a maximum diameter of 7″.
| Orifice | Contour based angle |
| 0.10 / .004″ | 19.90° |
| 0.15 / .006″ | 55.70° |
| 0.20 / .008″ | 72.50° |
| 0.30 / .012″ | 74.60° |
| 0.40 / .016″ | 82.00° |
| 0.50 / .020″ | 72.50° |
| 0.60 / .024″ | 91.00° |
| 0.80 / .032″ | 105.80° |
| 1.00 / .040″ | 106.90° |
| 1.20 / .048″ | 114.00° |