Description
NOTE: This product ships by freight and is only available for shipping within Canada.
NOTE: This product ships in multiple boxes. Some assembly required.
This heavy-duty plate mounted pressure washer from Canpump pairs a Honda 20.8 hp gasoline engine with a Canpump hollow shaft triplex pump with gearbox, delivering a max. output of up to 3,000 psi at 9.2 US gpm.
- Includes a premium P.A. Pulsar Rv unloader valve (pressure regulator)
- Completely customizable with our professional line of accessories of spray guns, foam kits, turbo rotating nozzles and more
- Half speed driven pump via gearbox reduction ensures durability and extended service intervals
- Includes a pressure safety valve to protect the pump
- Electric start
Gearbox Drive for Heavy-Duty Cleaning
This pressure washer is equipped with a gearbox drive system, which reduces the pump’s operating speed well below that of direct drive units. While direct drive machines typically run the pump at around 3400 rpm, gearbox-driven models operate at much lower speeds — often between 1500 and 1750 rpm, depending on the configuration. This slower speed reduces wear and heat, resulting in longer pump life and making the unit ideal for commercial use and extended cleaning sessions.
Engine Specifications
Engine model: Honda GX630
Net power output*: 20.8 hp (15.5 kW) @ 3,600 rpm
Net torque: 48.3 Nm @2,500 rpm
Displacement: 688 cc
Shaft size: 1″
Start mode: Electric start
Pump Specifications
Pump model: Canpump CT 3510 GB
Pump mechanism: Triplex plunger
Max. pressure: 3000 psi (206 bar) in this configuration
Max. flow rate: 9.2 US gpm (34.7 L/min)
Pump inlet: ¾″ F (¾″ Male to 1″ Male adapter included)
Pump outlet: ⅜″ F
Unloader valve: P.A. Pulsar Rv detachable (thread-on) unloader valve
Unloader inlet: ⅜″ F
Unloader outlet: ⅜″ F
Unloader bypass: ⅜″ F
Oil grade: SAE 80W-90 or greater gear oil
Gearbox reduction: 3400-1560 rpm
Additional Information
*The power rating of the engine indicated is the net power output tested on a production engine for the engine model and measured in accordance with SAE J1349 at 3,600 rpm (net power) and at 2,500 rpm (max net torque).
