Home
Spare Parts
Pumps
General Pump / Interpump
Plunger Oil Seals (Kit #2) for General Pump Series 47, 48, 66, 47.HT, TSF, CW47

Plunger Oil Seals (Kit #2) for General Pump Series 47, 48, 66, 47.HT, TSF, CW47

Idrobase

SKU:: 211002

CA$19.00

Plunger Oil Seals (Kit #2) for General Pump Series 47, 48, 66, 47.HT, TSF, CW47

Free Shipping in Canada on orders over $100

excludes hoses, freight & oversize items

CA$19.00

Description

Replacement Ø 22 mm plunger oil seals for General Pump and Interpump high-pressure triplex pumps.

Extra Information

Brand:

Idrobase

Nozzle Size	Flow	Operating Pressure Range (psi)
Orifice	Flow rate	362	435	507	580	652	725	797	870	942	1015
0.15 mm (0.006″)	L/min	0.03	0.033	0.036	0.038	0.04	0.043	0.045	0.047	0.049	0.05
0.15 mm (0.006″)	US gpm	0.008	0.009	0.009	0.01	0.011	0.011	0.012	0.012	0.013	0.013
0.20 mm (0.008″)	L/min	0.04	0.044	0.048	0.051	0.054	0.057	0.06	0.062	0.065	0.068
0.20 mm (0.008″)	US gpm	0.011	0.012	0.013	0.013	0.014	0.015	0.016	0.017	0.017	0.018
0.30 mm (0.012″)	L/min	0.068	0.075	0.081	0.086	0.091	0.096	0.101	0.105	0.11	0.114
0.30 mm (0.012″)	US gpm	0.018	0.02	0.021	0.023	0.024	0.025	0.027	0.028	0.029	0.03
0.40 mm (0.016″)	L/min	0.104	0.113	0.123	0.131	0.139	0.146	0.154	0.16	0.167	0.173
0.40 mm (0.016″)	US gpm	0.027	0.03	0.032	0.035	0.037	0.039	0.041	0.042	0.044	0.046
0.50 mm (0.020″)	L/min	0.114	0.125	0.135	0.144	0.153	0.161	0.169	0.176	0.183	0.19
0.50 mm (0.020″)	US gpm	0.03	0.033	0.036	0.038	0.04	0.043	0.045	0.047	0.048	0.05
0.60 mm (0.024″)	L/min	0.138	0.152	0.164	0.175	0.186	0.196	0.205	0.215	0.223	0.232
0.60 mm (0.024″)	US gpm	0.037	0.04	0.043	0.046	0.049	0.052	0.054	0.057	0.059	0.061
0.80 mm (0.032″)	L/min	0.165	0.181	0.195	0.209	0.221	0.233	0.245	0.256	0.266	0.276
0.80 mm (0.032″)	US gpm	0.044	0.048	0.052	0.055	0.058	0.062	0.065	0.068	0.07	0.073
1.00 mm (0.040″)	L/min	0.188	0.206	0.222	0.237	0.251	0.264	0.276	0.287	0.298	0.308
1.00 mm (0.040″)	US gpm	0.05	0.054	0.059	0.063	0.067	0.07	0.073	0.076	0.079	0.081
1.20 mm (0.048″)	L/min	0.207	0.227	0.245	0.262	0.278	0.293	0.307	0.32	0.332	0.343
1.20 mm (0.048″)	US gpm	0.054	0.06	0.065	0.069	0.073	0.077	0.081	0.085	0.088	0.091

Orifice	Contour based angle
0.10 / .004″	19.90°
0.15 / .006″	55.70°
0.20 / .008″	72.50°
0.30 / .012″	74.60°
0.40 / .016″	82.00°
0.50 / .020″	72.50°
0.60 / .024″	91.00°
0.80 / .032″	105.80°
1.00 / .040″	106.90°
1.20 / .048″	114.00°

Plunger Oil Seals (Kit #2) for General Pump Series 47, 48, 66, 47.HT, TSF, CW47

Idrobase

Description

Extra Information

Related Products

Shaft Oil Seal (Kit #3) for General Pump Series 47, 48, 66, 47.HT, TSF, CW47

Plunger Screws (Kit #6) for General Pump Series 47/48/49/50/47.HT/CW47

Piston Screw O-ring & Washer (Kit #6IP) for General Pump Series 47/48/47.HT/CW47

Dolly i5: Ceramic Plunger for General Pump Series 47/48/47.HT, P/N 47040509

Intermediate Rings + Restop (Kit #71) for General Pump Series 47/48/69/CW47

Pressure Washer Nozzle Size

Helpful Tips

Misting Nozzle Charts

Misting Nozzle Size Chart

Misting Nozzle Spray Angle