Battery-powered motors offering cordless operation for flexible and portable use. A growing category suited for applications where mobility and quiet operation are priorities.
Tolerance: Rounds down if the calculated size is within 0.10 of the next lower standard size.
Nozzle sizes are standardized in 0.5 increments (e.g., 2.0, 2.5, 3.0).
Too small a nozzle = too much pressure = risk of damage.
Too large a nozzle = lower pressure, but safer for your equipment.
Match the nozzle angle to your task:
0° (Red): Max pressure, for tough stains on concrete.
15° (Yellow): Heavy-duty cleaning.
25° (Green): General-purpose cleaning.
40° (White): Gentle cleaning (cars, windows).
65° (Black): Soap application, low pressure.
×
Misting Nozzle Charts
Misting Nozzle Size Chart
Nozzle Size
Flow
Operating Pressure Range (psi)
Orifice
Flow rate
362
435
507
580
652
725
797
870
942
1015
0.15 mm (0.006″)
L/min
0.03
0.033
0.036
0.038
0.04
0.043
0.045
0.047
0.049
0.05
US gpm
0.008
0.009
0.009
0.01
0.011
0.011
0.012
0.012
0.013
0.013
0.20 mm (0.008″)
L/min
0.04
0.044
0.048
0.051
0.054
0.057
0.06
0.062
0.065
0.068
US gpm
0.011
0.012
0.013
0.013
0.014
0.015
0.016
0.017
0.017
0.018
0.30 mm (0.012″)
L/min
0.068
0.075
0.081
0.086
0.091
0.096
0.101
0.105
0.11
0.114
US gpm
0.018
0.02
0.021
0.023
0.024
0.025
0.027
0.028
0.029
0.03
0.40 mm (0.016″)
L/min
0.104
0.113
0.123
0.131
0.139
0.146
0.154
0.16
0.167
0.173
US gpm
0.027
0.03
0.032
0.035
0.037
0.039
0.041
0.042
0.044
0.046
0.50 mm (0.020″)
L/min
0.114
0.125
0.135
0.144
0.153
0.161
0.169
0.176
0.183
0.19
US gpm
0.03
0.033
0.036
0.038
0.04
0.043
0.045
0.047
0.048
0.05
0.60 mm (0.024″)
L/min
0.138
0.152
0.164
0.175
0.186
0.196
0.205
0.215
0.223
0.232
US gpm
0.037
0.04
0.043
0.046
0.049
0.052
0.054
0.057
0.059
0.061
0.80 mm (0.032″)
L/min
0.165
0.181
0.195
0.209
0.221
0.233
0.245
0.256
0.266
0.276
US gpm
0.044
0.048
0.052
0.055
0.058
0.062
0.065
0.068
0.07
0.073
1.00 mm (0.040″)
L/min
0.188
0.206
0.222
0.237
0.251
0.264
0.276
0.287
0.298
0.308
US gpm
0.05
0.054
0.059
0.063
0.067
0.07
0.073
0.076
0.079
0.081
1.20 mm (0.048″)
L/min
0.207
0.227
0.245
0.262
0.278
0.293
0.307
0.32
0.332
0.343
US gpm
0.054
0.06
0.065
0.069
0.073
0.077
0.081
0.085
0.088
0.091
Misting Nozzle Spray Angle
All nozzles were tested at 1,000 psi using water at 70℉ (21.1℃). The room humidity was between 40-50% during the tests. The patternation measurements were conducted using the SETscan OP600 patternator that can measure sprays up to a maximum diameter of 7″.
