Home
Motors & Engines
Electric Motors
Canpump Electric Motor - 7.5 hp Single-Phase 240 V, NEMA 184T 1-1/8-inch Shaft

Canpump Electric Motor - 7.5 hp Single-Phase 240 V, NEMA 184T 1-1/8-inch Shaft

Canpump

SKU:: 402106

C$1,300.00

Canpump Electric Motor - 7.5 hp Single-Phase 240 V, NEMA 184T 1-1/8-inch Shaft

Free Shipping in Canada on orders over $100

excludes hoses, freight & oversize items

C$1,300.00

Description

NOTE: This product ships by freight and is only available for shipping within Canada.

Designed for use in stationary air compressors, pumps, conveyers, fans, blowers and coolers, this 7.5 horsepower electric motor from Canpump comes ready to install with an on/off switch and power cord with a plug. The motor is reversible and has dual capacitors for fast startups.

Power source: Single-Phase
Power: 7.5 hp (5.6 kW)
Speed: 1,734 rpm
Voltage: 240 V
Current: 33 amp
Frequency: 60 Hz
Protection: IP44
Shaft: 1⅛″ shaft with NEMA 184T flange

Extra Information

Brand:

Canpump

Power:

7.5 hp

RPM:

Half speed

Voltage:

240 V

Current:

33 amp

Checking fitment with your existing equipment?

See which replacement parts we carry fit models from other brands in our Known Fitment Information .

Only models we’ve verified appear there—if your unit isn’t listed, it may still be compatible. Ask us below if you’re unsure.

Nozzle Size	Flow	Operating Pressure Range (psi)
Orifice	Flow rate	362	435	507	580	652	725	797	870	942	1015
0.15 mm (0.006″)	L/min	0.03	0.033	0.036	0.038	0.04	0.043	0.045	0.047	0.049	0.05
0.15 mm (0.006″)	US gpm	0.008	0.009	0.009	0.01	0.011	0.011	0.012	0.012	0.013	0.013
0.20 mm (0.008″)	L/min	0.04	0.044	0.048	0.051	0.054	0.057	0.06	0.062	0.065	0.068
0.20 mm (0.008″)	US gpm	0.011	0.012	0.013	0.013	0.014	0.015	0.016	0.017	0.017	0.018
0.30 mm (0.012″)	L/min	0.068	0.075	0.081	0.086	0.091	0.096	0.101	0.105	0.11	0.114
0.30 mm (0.012″)	US gpm	0.018	0.02	0.021	0.023	0.024	0.025	0.027	0.028	0.029	0.03
0.40 mm (0.016″)	L/min	0.104	0.113	0.123	0.131	0.139	0.146	0.154	0.16	0.167	0.173
0.40 mm (0.016″)	US gpm	0.027	0.03	0.032	0.035	0.037	0.039	0.041	0.042	0.044	0.046
0.50 mm (0.020″)	L/min	0.114	0.125	0.135	0.144	0.153	0.161	0.169	0.176	0.183	0.19
0.50 mm (0.020″)	US gpm	0.03	0.033	0.036	0.038	0.04	0.043	0.045	0.047	0.048	0.05
0.60 mm (0.024″)	L/min	0.138	0.152	0.164	0.175	0.186	0.196	0.205	0.215	0.223	0.232
0.60 mm (0.024″)	US gpm	0.037	0.04	0.043	0.046	0.049	0.052	0.054	0.057	0.059	0.061
0.80 mm (0.032″)	L/min	0.165	0.181	0.195	0.209	0.221	0.233	0.245	0.256	0.266	0.276
0.80 mm (0.032″)	US gpm	0.044	0.048	0.052	0.055	0.058	0.062	0.065	0.068	0.07	0.073
1.00 mm (0.040″)	L/min	0.188	0.206	0.222	0.237	0.251	0.264	0.276	0.287	0.298	0.308
1.00 mm (0.040″)	US gpm	0.05	0.054	0.059	0.063	0.067	0.07	0.073	0.076	0.079	0.081
1.20 mm (0.048″)	L/min	0.207	0.227	0.245	0.262	0.278	0.293	0.307	0.32	0.332	0.343
1.20 mm (0.048″)	US gpm	0.054	0.06	0.065	0.069	0.073	0.077	0.081	0.085	0.088	0.091

Orifice	Contour based angle
0.10 / .004″	19.90°
0.15 / .006″	55.70°
0.20 / .008″	72.50°
0.30 / .012″	74.60°
0.40 / .016″	82.00°
0.50 / .020″	72.50°
0.60 / .024″	91.00°
0.80 / .032″	105.80°
1.00 / .040″	106.90°
1.20 / .048″	114.00°

Canpump Electric Motor - 7.5 hp Single-Phase 240 V, NEMA 184T 1-1/8-inch Shaft

Canpump

Description

Extra Information

Checking fitment with your existing equipment?

Related Products

Canpump Electric Motor - 5 hp Single-Phase 240 V, NEMA 184T 1-1/8-inch Shaft

Canpump Electric Motor: 5 hp Three-Phase 600 V, NEMA 184T 1-1/8-in Shaft

Canpump Electric Motor - 5.0 hp Three-Phase 230/460 V, NEMA 184T 1-1/8 in Shaft

Canpump Electric Motor - 5 hp Single-Phase 240 V, NEMA 56C 5/8-inch Shaft

Canpump Electric Motor - 2 hp Single-Phase 120 V, NEMA 56C 5/8-inch Shaft

Pressure Washer Nozzle Size

Helpful Tips

Misting Nozzle Charts

Misting Nozzle Size Chart

Misting Nozzle Spray Angle

Flow Rate Calculator

Helpful Tips