Description
NOTE: This product ships in multiple boxes only and is available for shipping within Canada. Some assembly required.
This Canpump soft wash system pairs a Loncin G200F engine with a Bertolini PPS 500 diaphgram pump, delivery up to 508 psi at 14.3 US gpm which can effectively remove stains or buildup like mold, bacteria, mildew, moss, fungus, algae. Ideal for professional soft washing on surfaces including wood siding, roofs, pavers, brick, windows, doors, outdoor furniture, etc.
Bertolini PPS 500 Pump Highlights
The Bertolini PPS 500 diaphragm pump is from a reliable range of polypropylene spraying pumps, providing constant flow and satisfactory performance when pumping chemicals, including the most aggressive on the market.
-
Heads and manifolds are made of strengthened polypropylene to ensure the best compatibility with chemical products, with the same properties as Polypumps.
-
Oil tank is fitted with a matched diaphragm to ensure correct oil level.
-
Manifolds are kept separate from the crankcase for complete protection of the kinematic mechanism in the oil bath.
-
Crankshaft stroke is reduced, increasing diaphragm life by minimizing stress on the diaphragms.
-
The only pump in the world equipped with independent pulsation dampers mounted directly on the pumping chamber, which ensures a regular flow of liquid, resulting in excellent spray nozzle performance and vibration-free operation.
-
Features a direct liquid entry system onto the diaphragm, thanks to check valves perfectly aligned with the diaphragm area, offering a excellent suction capacity and 30% higher volumetric efficiency.
-
Water-oil heat exchanger reduces the pump’s operating temperature, extends service life, and improves volumetric efficiency.
Pump specification
Pressure: 508 psi
Flow Rate: 14.3 US gpm
Inlet: 1⁹⁄₁₆″
Outlet: G ¾″
Oil type: SAE 30
Flow Rate: 14.3 US gpm
Inlet: 1⁹⁄₁₆″
Outlet: G ¾″
Oil type: SAE 30
Loncin G200F Engine Highlights
The Loncin G200F is a 4-stroke air cooled gasoline engine that conform to major environmental regulatory standards. This engine comes with standard footprint mountings and can be used as a drop-in replacement for similar displacement engines with ¾″ horizontal crankshafts.
- Easy start, start within 3 attempts
- Optimized combustion chamber and air vent to improve the burning efficiency
- Lower fuel consumption and exhaust emission
Engine specification
Engine type: Single cylinder, Air cooled, 4-stroke, OHV
Displacement: 196 cc
Power: 6.5 hp (4.85 kW) @ 3,600 rpm
Net torque: 12.4 Nm @ 2,500 rpm
Bore x Stroke: 68 × 54 mm
Starting system: Recoil
Lubrication system: Splash
Air filter: Foam+paper, oil bath, cyclone-type filter element
Engine oil capacity: 0.6 l
Fuel tank capacity: 3.6 l
Net weight: 36 lbs
Dimensions: 312 x 376 × 335 mm
Shaft: ¾″
Displacement: 196 cc
Power: 6.5 hp (4.85 kW) @ 3,600 rpm
Net torque: 12.4 Nm @ 2,500 rpm
Bore x Stroke: 68 × 54 mm
Starting system: Recoil
Lubrication system: Splash
Air filter: Foam+paper, oil bath, cyclone-type filter element
Engine oil capacity: 0.6 l
Fuel tank capacity: 3.6 l
Net weight: 36 lbs
Dimensions: 312 x 376 × 335 mm
Shaft: ¾″